Expert Answers about Jeep JK Wrangler

• Does Blue Ox Patriot Supplemental Braking System Require Battery Disconnect for 2018 Jeep Wrangler
• The Blue Ox Patriot # BLU37TR supplemental braking systems do not require a battery shutoff system for your 2018 Jeep Wrangler. The only thing they require is the 12 Volt Outlet Kit # RM-9332. I've added links below to video reviews for you to check out as well of the outlet and the Blue Ox Patriot # BLU37TR.
  view full answer...


• Parts Needed to Flat Tow 2018 Jeep JK Wrangler
• So there are a number of parts you will need in order to safely flat tow your 2018 Jeep JK Wrangler - base plates, a tow bar, safety chains, tow bar wiring, and a supplemental braking system. You didn't mention if your Jeep has any type of special bumper or off-road bumper, so I'm going to assume you do have the standard factory bumper, which only matters in regards to the correct base plate fit. The parts you will need in order to flat tow your '18 JK Wrangler are the following: - Base...
  view full answer...


• List of Parts Needed to Flat Tow 2018 Jeep JK Wrangler Behind RV
• Every flat-towed vehicle requires the same components: base plates, a tow bar, safety cables, wiring, and a braking system. I've hand-picked the best products confirmed to fit your 2018 JK Jeep Wrangler with a standard factory bumper (no winches or guards). Check them out below. 1. Roadmaster Direct-Connect Base Plate Kit # RM-521448-5 (Not a fit for Winter, Hard Rock, or 75th Anniversary models) 2. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 (includes safety cables...
  view full answer...


• Brake controller Wiring With Factory Tow Package On A 2018 Jeep JK Wrangler
• When it comes to installing any brake controller on your 2018 Jeep JK Wrangler with a factory tow package there will not be a plug that is located underneath the dash. There will be wires that you will have to splice into to activate your controller. The Curt TriFlex Trailer Brake Controller # C24VV and The Universal Wiring Adapter # C51515 is the controller that I recommend. The controller has 9 sensitivity settings that let you adjust your initial braking power and aggressiveness. It...
  view full answer...


• Parts Needed to Complete a Flat Tow Set Up on a 2018 Jeep JK Wrangler
• To complete your flat tow setup on the 2018 Jeep JK Wrangler along with the Black Hawk tow bar you need the following: Braking System - If your motor home has hydraulic brakes I recommend Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional Item # SM99251. This is a proportional braking system which matches the braking pressure applied from the RV , is very easy to use by simply flipping the switch on when ready to tow, can be mounted anywhere on the vehicle, and is a...
  view full answer...


• Parts Needed to Install Tekonsha Prodigy P2 Brake Controller on a 2018 Jeep JL Wrangler
• The Tekonsha Prodigy P2 # 90885 will work with your 2018 Jeep JK Wrangler. If you have the factory tow package then you may need to use the kit # 5506 and route to the battery for power. If you don't have the factory tow package then you need the wiring kits # 118416 and # ETBC7 and the bracket # 18136 to complete your setup. If you have found loose wires under your driver side dash then you will want to check for labels or use a circuit tester # PTW2979 to determine which wire carries...
  view full answer...